Filter
Top Products
Introduction
WorkCentre Pro 555, 575 2-9
Control Panel Components and Function Keys
The Control Panel is used to program the features and to initiate
communications. The following figures and tables illustrate the
Control Panel and describe each component.
* Symbol used on International machines.
Item Description Function
1 Display Displays the machine status and messages. The display provides
information about the current operation mode. The machine has the
following operating modes: Standby Mode, Communication Mode,
Menu Mode, Copy Mode, PC Printing Mode, (see “Operation
Modes” later in this Chapter).
2 PC LED Illuminates when a PC communication is in progress.
3 Line LED Illuminates when a fax communication is in progress.
4 The
Menu
key is used to access menu items listed in the menu
map which are not available from the direct access keys. The
Menu key is also used as a navigation key for scrolling up a
menu list.
5 Deletes the character at the position of the cursor.
6 Used to
Exit
a menu list.
7
Left
or Back navigation key used for going back to a previous
menu list. Also used for positioning the cursor for character
delete or insert when you enter names.
8
Down
navigation key used for scrolling down a menu list.
9
Right
navigation key used for going to the next level of menus of
the highlighted item. Also used when you enter names for
positioning the cursor for character delete or insert.
Menu or *
Delete or *
Exit or *