Filter
Top Products
Getting Started
3-8 WorkCentre Pro 555, 575
Setting the Dial Mode*
Your machine must be set to the dialing mode compatible with your
telephone line requirements. The Dial Modes supported are tone and
pulse. Pulse is sometimes referred to as rotary dial.
If your machine is connected to a PBX system, you may need to enter
a number to access the outside telephone line.
To set the Dial Mode:
1. Press:
2.
Select the Dial Mode.
To select tone, press .
To select pulse, press .
3.
Enter the number required to access an outside line, then press
Enter.
(If no number is required, press
Enter
.)
The menu selection screen redisplays. Press
Exit
or
Stop
to
return to the Standby Mode.
* This feature is not allowed in all markets.
Menu
2.Pulse
Dial mode
1.Tone
Call number (10 max)
[_ ]