Filter
Top Products
GSA Operations
Document Number: 401-364
18
Turning on the System
CAUTION: Before beginning a computer session, running a full Disk
Recovery is highly recommended to reset the entire system, especially if this is
the first session of a new series of operating sessions (see page 50).
To power up the case
• Locate the switch labeled STORE/POWER.
• Position the switch to the POWER position.
Power will now be provided to all devices in the case except the computer.
To power up the computer
• Ensure the STORE/POWER switch is in the POWER position and then turn
on the switch labeled CPU.
• Press the display release on the front of the computer and lift the display panel.
• Press and hold the Power Switch on the side of the laptop until the Power
Indicator light illuminates (as shown in Figure 8).
Figure 8 Power Switch and Indicator