Filter
Top Products
ENJOYING STEREO SOUND
47 En
BASIC
OPERATION
English
You can enjoy 2-channel stereo playback by changing the
beam mode to the stereo playback using the beam mode
buttons on the remote control. The normal sounds are
output from the front and left channels in the 2-channel
stereo. This is ideal for playing back hi-fi sources, such as
CDs, and can be used to replace your TV speakers.
1 Set the operation mode selector to YSP to
switch to the operation mode of this unit.
2 Press STEREO on the remote control to
select the stereo playback as a beam mode.
• When you play back multi-channel sources, all signals except
those for the front left and right channels are mixed down and
output from the front left and right channels. No audio is output
from the center and rear channels.
• The surround mode becomes disabled when the stereo playback
is selected as the beam mode.
• When you play back Dolby Digital audio signals in the stereo
playback, the dynamic range becomes compressed. If the
volume level decreases to the extreme, use other beam modes
except the my beam.
• If the stereo playback is selected as the beam mode, the
surround modes (see page 44) and the CINEMA DSP programs
(see page 52) become ineffective.
ENJOYING STEREO SOUND
Stereo playback
STEREO
MY BEAM
21
SLEEP
CH LEVEL MENU
RETURN
TEST
SURROUND
OFF
SPORTS
3
4
56
789
0
+10
5BEAM
ST+3BEAM 3BEAM
MUSIC MOVIE
VOL MODE
AUTO
SETUP
INPUTMODE
YSP
TV/AV
ENTER
YSP
TV/AV
4
STEREO
Notes