Filter
Top Products
77 En
ADJUSTING SYSTEM PARAMETERS
ADVANCED
OPERATION
English
4 Press / to switch between PROTECT: ON
and PROTECT: OFF.
• Select PROTECT: ON to activate the protection
feature.
• Select PROTECT: OFF to deactivate the protection
feature.
5 Press STANDBY/ON on the front panel to set
this unit to the standby mode.
The new setting will be activated when you turn on
the power of this unit next time.
You can set the maximum volume level so that this unit
will not output sound beyond the limited volume level.
1 Repeat steps 1 to 3 in “Using the system
parameters” on page 76.
2 Set the operation mode selector to YSP to
switch to the operation mode of this unit.
3 Press / on the remote control so that
MAX VOLUME SET is shown in the front
panel display.
4 Press ENTER.
5 Press / to adjust the maximum volume
level.
Control range: MAX, 99 to 01, MIN
Control step: 1
6 Press STANDBY/ON on the front panel to set
this unit to the standby mode.
The new setting for the maximum volume level will
be activated when you turn on the power of this unit
next time.
Setting the MAX VOLUME
ENTER
VOL
PROTECT: ON
VOL
PROTECT: OFF
STANDBY/ON
YSP
TV/AV
ENTER
VOL
MAX VOLUME SET
ENTER
ENTER
STANDBY/ON