Yamaha YSP-1100 Projector User Manual

Open as PDF

of 100

69 En

MANUAL SETUP

ADVANCED

OPERATION

English

• Select COMPONENT (1) to assign components to the

STB COMPONENT VIDEO IN jacks of this unit.

Choices: TV, VCR

• Select COMPONENT (2) to assign components to the

DVD/AUX COMPONENT VIDEO IN jacks of this

unit.

Choices: DVD, AUX

• Select COMPOSITE (3) to assign components to the

DVD/AUX VIDEO IN jack of this unit.

Choices: AUX, DVD

■ INPUT MODE (Input mode)

Use to designate the input mode for the input sources

connected to the DIGITAL INPUT jacks when you turn on

the power of this unit. For information on the types of

audio signals that can be output by this unit, see “Surround

modes and recommended sources” on page 44.

Choices: AUTO, LAST

• Select AUTO to allow this unit to automatically detect

the type of input signal and select the appropriate input

mode.

• Select LAST to set this unit to automatically select the

last input mode used for that input source. If the type of

input signal is different from the setting, no sounds will

be produced.

■ INPUT TRIM (Input trim)

Use to adjust the input level of the input source.

• Select TV ANALOG to adjust the level of audio and

video signals input at the TV/STB analog audio input

jacks of this unit.