Filter
Top Products
71 En
MANUAL SETUP
ADVANCED
OPERATION
English
■ OSD SET (OSD settings)
Use to adjust the display position and the background
color of the OSD.
OSD SHIFT (OSD shift)
Use to adjust the vertical position of the OSD. Adjust
towards the – (minus) direction to raise the position of the
OSD, and adjust towards the + (plus) direction to lower it.
Choices: –5 to +5
Initial setting: 0
OSD BACK COLOR (OSD background color)
Use to select the background color of the OSD.
Choices: BLUE, GRAY
■ UNIT SET (Unit settings)
Use this to change the display unit of measurement.
Choices: METERS (Australia and U.K. models),
FEET (U.S.A. model)
• Select METERS to input distances in meters.
• Select FEET to input distances in feet.
If you change this setting, the adjusted beam settings may change.
Note
OSD SHIFT;;;;;;;;0
OSD BACK COLOR;;;BLUE
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
B)OSD SET
p
p
.
p
p
METERS FEET
[ ]/[ ]:Select
[ENTER]:Return
p
p
C)UNIT SET
p