Yamaha YSP-500 Projector User Manual


 
Using this manual
5 En
INTRODUCTION
English
This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the
supplied owner’s manual for each component.
Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified.
y indicates a tip for your operation.
This manual is printed prior to production. Designs and specifications are subject to change in part as a result of improvements, etc. In
case of differences between the manual and the product, the product has priority.
1 Install this unit in your listening room.
See “Installation” on page 13.
2 Connect this unit to your TV and other external components.
See “Connections” on page 16.
3 Prepare the remote control and turn on the power of this unit.
See “Getting started” on page 26.
4 Run AUTO SETUP.
See “AUTO SETUP (IntelliBeam)” on page 31.
5 Play back a source.
See “Playback” on page 41.
6 Change the beam modes.
See “Enjoying surround sound” on page 44.
7 Run MANUAL SETUP to fine-tune settings and/or set remote control codes.
See “MANUAL SETUP” on page 56 and “Remote control features” on page 79.
Using this manual
Notes
If you want to make additional settings
and adjustments