Filter
Top Products
72 En
Adjusting the system parameters
You can protect the settings you saved in the system
memory of this unit from being accidentally erased or
unwantedly changed.
1 Repeat steps 1 to 3 in “Using the system
parameters” on page 71.
2 Set the operation mode selector to YSP.
3 Confirm that “MEMORY PROTECT” is
displayed in the front panel display and
press ENTER.
4 Press / to switch between “PROTECT:
ON” and “PROTECT: OFF”.
• Select PROTECT: ON to activate the protection
feature.
• Select PROTECT: OFF to deactivate the protection
feature.
5 Press STANDBY/ON on the remote control to
set this unit to the standby mode.
The new setting will be activated when you turn on
the power of this unit next time.
Setting the MEMORY PROTECT
YSP
TV/AV
ENTER
MEMORYX PROTECT
ENTER
X PROTECT:X ON
X PROTECT:X OFF
STANDBY/ON