Filter
Top Products
Rev. 1.00
- 18 -
EM 220
Mobile Printer User’s Manual
3-2-3-2 Battery Charging
1) Fasten batteries via the battery
hooks into the Quad Charger as
shown above.
2) Push the battery in until a snapping
sound is emitted.
3) Charging begins as soon as the
battery is completely inserted.
Batteries are charged to 8.4VDC, 0.8A.
4) Push the hook and pull up to extract
the battery.
NOTE
Battery charging status descriptions are as follows.
LED Charge Status Charge Time
Red LED On Charging
Green LED On Charging Complete
Red Lamp Blinking
Problem with Battery and/or
Placement
2 hours
CAUTION
If the red LED is blinking, try extracting the battery and reinserting.
If the red LED continues to blink, please consult the reseller.