Zebra Technologies EM 220 Printer User Manual


 
Rev. 1.00
- 26 -
EM 220
Mobile Printer User’s Manual
6. Peripherals Connection
This product can communicate with other devices via Bluetooth communication and cable.
6-1 Bluetooth Connection
1) The printer can be connected to devices
equipped with Bluetooth communication
capacity (PDAs, PCs, etc.).
2) Use the Bluetooth connection function
supported by the device to connect to the
printer.
NOTE
Refer to the Bluetooth Manual for more details
on connection.
You can check authentication, Encryption mode
as well as connection mode of the Bluetooth
from self test page.
6-2 Interface Cable Connection
1) Open the Interface Cap .
2) Connect the interface cable (optional) to
the cable connector of the printer.
NOTE
Use only cables (optional) provided by Zebra
(USB, Serial).
3) Connect the interface cable to the USB
port of the device (PDAs, PCs, etc.).
NOTE
The interface cable that can be connected with
the printer is available in both USB and Serial
type.
Refer to the service manual for detailed interface
cable specifications.
CAUTION
The Bluetooth connector located on the right side of the printer is for program downloading
only. This connector is for service providers only.