Filter
Top Products
20
MZ Series User Guide
other Bluetooth device.
2. A blinking light indicates that the printer is receiving
data via Bluetooth communications.
• If the printer has an 802.11b/g radio installed:
1. A steady light indicates the printer has associated with
a wireless Local Area Network (WLAN).
2. A blinking light indicates that the printer is attempting
to associate with a WLAN.
Figure 9: Printer Controls
Power Button
Press until Power Light turns on, then
release. Press again to turn unit o.
Feed Button
Press to advance the media. Re-
lease to stop.
Communication Light (Blue)
When lit steadily indicates a wireless
communications link is established, when
blinking indicates data transmission.
Charge Light
(Green/Amber)
Green indicates a fully charged
battery. Amber indicates
the battery is less than 90%
charged.
IrDA Window
IrDA enabled devices must be located
within the printer’s IR zone for IR
communications to occur.
Refer to the IR Communications section.
Media Status Light
(Amber)
When o Indicates normal opera-
tion.Blinking indicates either no
media or that the media compart-
ment is open.
Power Light (Green)
Indicates power status and battery condition.
A steadily lit indicator means the battery has
more than a 30% charge remaining. A blinking
indicator means the battery has less than a
30% charge remaining.