Filter
Top Products
22
MZ Series User Guide
Cable Communication
Caution • The printer should be turned o before connecting
or
disconnecting the communications cable.
The small connector on the USB cable plugs into the printer.
The connectors are keyed to assure correct alignment; do not
try to force the cable if it does not plug in. The other end of
the cable must be plugged into the host terminal as shown in
Figure 10, or the USB port on a computer as shown in Figure
11. The MZ series utilizes the USB Open HCI interface driver
allowing it to communicate with Windows
®
based devices.
USB drivers are included in the Zebra Universal Driver which
can be downloaded from the Zebra Web site. Other terminals
or communications devices may require the installation of
special drivers to use the USB connection. Consult the factory
for further details.
USB Communications
Cable to Terminal
Refer to Appendix A for details.
Figure 10: Cable Communications
Figure 11: Communications with a P.C.
Communications
Port
USB Communications
Cable to Computer
Refer to Appendix A for details.
Communications
Port