Filter
Top Products
27
MZ Series User Guide
Adjustable Shoulder Strap
Refer to Figure 14 if you have ordered the shoulder strap op-
tion for your printer. Secure each end of the shoulder strap as
shown below. Use the main buckle on the shoulder strap to
adjust to the desired length.
NOTE: If you are using a shoulder strap, ensure it is pulled away from
the printer when installing in the Power Station. See page 13.
Hold Buckle
Pull Strap here to
lengthen
Pull Strap here to
shorten
Figure 14: Using the Optional Shoulder Strap
Once the shoulder strap is secured,
slide the buckle as shown until
you achieve the desired
length.
Thread the free end of the shoulder strap
through one of the slots on the belt clip
Thread the free end of the shoulder strap through the
buckle and pull tight to adjust.
Secure the other end of the strap in the remaining slot on the belt clip.