Filter
Top Products
10
MZ Series User Guide
Getting Ready to Print
Battery
Installing and Removing the Battery
Important • Batteries are shipped partially charged. Remove any
protective packaging from new battery packs prior to use.
Figure 2.1: Installing the Battery
1. Use a coin to rotate the
Battery Compartment
lock
1
/
4
turn as shown.
2. Remove the Battery
Compartment Cover
3. Plug the Battery
Pack connector into the
Printer.
Battery Pack
Note location of label
4. Re-install the Battery Compartment Cover and
rotate the lock back
1
/
4
turn to lock it in place .
Ensure the battery leads are not pinched prior to replacing the
battery cover.