Filter
Top Products
Zebra XiIII-Series User’s Guide 83
PAUSE Key Self Test
This self test can be used to provide the test labels required when making
adjustments to the printer’s mechanical assemblies. See the sample
printout in Figure 34.
1. Turn off the printer.
2. Press and hold the PAUSE key while turning on the power.
• The initial self test prints 15 labels at 2.4"/61 mm per second
(1"/25.4 mm per second for the 96XiIII), then automatically pauses
the printer. When the PAUSE key is pressed, an additional 15
labels print.
• While the printer is paused, pressing the CANCEL key alters the
self test. When the PAUSE key is pressed, the printer prints 15
labels at 6"/152 mm per second (4"/102 mm per second for the
96XiIII).
• While the printer is paused, pressing the CANCEL key again alters
the self test again. When the PAUSE key is pressed, the printer
prints 50 labels at 2.4"/61 mm per second (1"/25.4 mm per second
for the 96XiIII).
• While the printer is paused, pressing the CANCEL key again alters
the self test a third time. When the PAUSE key is pressed, the
printer prints 50 labels at 6"/152 mm per second (4"/102 mm per
second for the 96XiIII).
• While the printer is paused, pressing the CANCEL key again alters
the self test a fourth time. When the PAUSE key is pressed, the
printer prints 15 labels at the printer’s maximum speed.
• To exit this self test at any time, press and hold the CANCEL key.
Figure 34