Filter
Top Products
RETURN MATERIALS AUTHORIZATION
iii
980261-001 Rev. B
Before returning any equipment to Zebra Technologies Corporation for in-warranty or out-of-
warranty repair, contact Repair Administration for a Return Materials Authorization (RMA)
number. Repack the equipment in the original packing material and mark the RMA number
clearly on the outside. Ship the equipment, freight prepaid, to the address listed below:
For USA and Latin America:
Zebra Technologies Corporation
Eltron Card Printer Products
1001 Flynn Road
Camarillo, CA. 93012-8706. USA
Phone: +1 (805) 579 1800
Fax: +1 (805) 579 1808
Toll Free in US: (800) 452-4056
For Europe, Asia, and Pacific:
Zebra Technologies Corporation
Eltron Card Printer Products
Zone Industrielle, Rue dAmsterdam
44370 Varades, France
phone: +33 (0) 240 097 070
Fax: +33 (0) 240 834 745
COPYRIGHT NOTICE
This document contains information proprietary to Zebra Technologies Corporation. This
document and the information contained within is copyrighted by Zebra Technologies
Corporation and may not be duplicated in full or in part by any person without written approval
from Zebra. While every effort has been been made to keep the information contained within
current and accurate as of the date of publication, no guarante is given or implied that the
document is error-free or that it is accurate with regard to any specification. Zebra reserves the
right to make changes, for the purpose of product improvement, at any time.
TRADEMARKS
P310 is a service mark and Eltron is a registered trademark of Zebra Technologies Corpora-
tion. Windows and MS-DOS are registered trademarks of Microsoft Corp. All other marks are
trademarks or registered trademarks of their respective holders.
FOREWORD
This manual contains installation and operation information for the P310 Series card printers
manufactured by Zebra Technologies Corporation, Camarillo, California.