Filter
Top Products
34
980261-001 Rev. B
MEDIA LOADING ORIENTATION
Orient the cards with the Smart Card Chip at the
top of the card and facing away from the printer.
SMART CARD CONTACT STATION INTERFACE
When a command to the parallel printer inter-
face sends a card to the Smart Card Contact Sta-
tion, the printer connects the Smart Card Contact
Station to the female DB-9 connector on the rear
of the printer.
An attached external Smart Card Programmer
can be used to program Smart Card chips.
DO NOT position printing over the Smart Card
Chip.
Refer to the Card Printer Programmer's Manual for complete programming information.
7
8
DB - 9
PINS
6
9
C7 (I/O)
C8 (RFU)
SMART CARD
CONTACT POINTS
C6 (Vpp)
(GND when chip is at
station)
C2 (Reset)
C3 (Clock)
SMART CARD
CONTACT POINTS
CI (Vcc)
C4 (RFU)
C5 (GND)
2
3
DB - 9
PINS
1
4
5