Filter
Top Products
Using the Optional Media Adapter Plates
If your media roll has a larger diameter
core, you can use an accessory to adapt
the core to the media holders.
1. Note which position will fit the
diameter of the roll core.
2. On the left side plate, align the pegs
with the screws and use a small
Phillips driver to tighten them.
3. On the right side plate, align the pegs
with the screws and use a small
Phillips driver to tighten them.
4. Align the plates so that the pegs hold
the roll core and press together.
5. Place the roll into the media
compartment.
980476-001A 11