Filter
Top Products
Getting Started
Defaulting the 10/100 Internal PS
38
14197L-001 Rev. A ZebraNet
®
10/100 Internal Print Server for ZM400 and ZM600 User Guide 04/19/2007
Defaulting the 10/100 Internal PS
This section provides you with instructions for defaulting the 10/100 Internal PS to factory
settings using the control panel, WebView, and ZebraNet View.
Control Panel
To default the 10/100 Internal PS to factory settings using the control panel,
complete these steps:
1. From the control panel, press Setup/Exit two times.
2. Press Plus (+ key) five times.
The control panel will read DEFAULT NET.
3. Press Setup/Exit to save the change.
4. After the printer defaults all settings, the control panel will show PRINTER READY.