Filter
Top Products
Chapter 3: Specifying TCP/IP Settings 17
5
55
5
Click Apply Now (or Save if prompted) and close the
Network pane.
Once you have specified the settings, you are ready to surf the
Web. Continue with Testing Your Internet Connection on
page 9.
Mac OS 7.6.1 - 9.2.2
1
11
1
From the Apple menu, choose Control Panels and then
TCP/IP to display the TCP/IP Window.
2
22
2
Under Connect via:, select Ethernet built-in.
3
33
3
Under Configure:, do the following, depending on your
situation:
!
If you are logging into the Zoom Configuration
Manager: Ensure that Static is highlighted in the
Configure: list box, then select Manually. Enter the
values provided in the table below appears in the
appropriate fields.
For this value… Enter…
IP Address
Any value between
10.0.0.4
and
10.0.0.20
. For example, type
10.0.0.10
.
Subnet Mask 255.255.255.0
Router Address 10.0.0.2
!
If you are using dynamic IP addressing: Select Using
DHCP Server. Do not enter anything in the DHCP
Client ID field.
!
If you are using a static IP address: Select Static and
then enter the values provided to you by your Internet
service provider for IP Address:, Subnet Mask:, Router
Address, and Name Server Addr:.