Filter
Top Products
Chapter 3: Specifying TCP/IP Settings 21
Debian
Depending on what you want to do, specify the appropriate
TCP/IP settings as shown in the tables below.
Dynamic IP Addressing
Add this line to the file
/etc/network/interfaces
:
iface eth0 inet dhcp
Reboot with this command:
/sbin/shutdown -r now
Static IP Addressing
Add the following lines to the file
/etc/network/interfaces
, but
include the values for
address
,
netmask
, and
gateway
provided by your Internet service provider next to the
appropriate label:
iface eth0 inet static
address
netmask
gateway
Add the following lines to the file
/etc/resolv.config
, but
include the values for
address
,
netmask
,
gateway
, and
dnc-
nameservers
provided by your Internet service provider next
to the appropriate label:
iface eth0 inet static
address
netmask
gateway
dns-nameservers
Reboot with this command:
/sbin/shutdown -r now
Logging into the Zoom Configuration Manager
Add these lines to the file /etc/sysconfig/network/ifcfg-eth0:
BOOTPROTO=”static”
BROADCAST=”10.0.0.255”
IPADDR=”10.0.0.10”
NETMASK=”255.255.255.0”
NETWORK=”10.0.0.2”
(Note that for IPADDR, you can enter any value
between 10.0.0.4 and 10.0.0.20.)
Reboot with this command:
/sbin/shutdown -r now