Filter
Top Products
31
Appendix A: Removing an
Internal Modem
If you are replacing an external modem or if your computer does not
have an internal modem installed, you do not need this section.
1 Before you take out the modem, you must inform Windows that
you are going to remove it. Follow these steps:
Windows Vista, XP and 2000: Open Control Panel and select
Phone and Modem Options. If prompted, enter your Location
information. Then click the Modems tab, select your old modem,
and click Remove.
Windows Me and 98: Click Start→Settings→Control Panel
and select Modems. If prompted, enter your Location
information. In the Modems Properties dialog box, select your
old modem, and click Remove.
2 Physically remove the old modem as follows:
• Shut down and turn off the computer.
• Remove any cables connected to the modem.
• Open the case of the computer.
• If applicable, remove the screw that attaches the modem
bracket to the computer.
• Pull the modem out of its slot.
• Replace the computer’s case.
Return to the installation instructions.