Filter
Top Products
System Maintenance 89
11. CLU - (Current Line Utilization) - percentage of current bandwidth
used on this channel.
12. ALU - (Average Line Utilization) - average CLU for this channel.
13. Up Time - time this channel has been connected to the current
Remote Node.
14. Ethernet - shows the current status of the LAN connection on
your Prestige.
15. Status - shows the current status of the LAN which may be
10M/Half Duplex, 10M/Full Duplex, 100M/Half Duplex, or
100M/Full Duplex. Left hand side of the “/” is the speed of the
Ethernet, and the right hand side is the mode of the Ethernet.
16. TX Pkt - the number of transmitted packets to LAN.
17. RX Pkt - the number of received packets from LAN.
18. Collision - number of collisions.
19. Name - displays the system name of your Prestige. This information
can be modified in Menu 1 - General Setup.
20. RAS S/W Version - refers to the version of the current RAS
software.
21. IDSL F/W Version - refers to the version of the current ISDN
firmware.
22. Ethernet Address - refers to the Ethernet MAC address assigned
to your Prestige.
Terminal Baud Rate
Users can set up different baud rates for the RS-232 connection
through menu 24.2 Terminal Baud rate. Your Prestige supports 9600
(default), 19200, and 38400bps for the RS-232 connection.