Filter
Top Products
58 Novell IPX Configuration
6. Tick Count - This field indicates the time-ticks required to reach
the Remote Node. The default is two (2).
7. W/D Spoofing (min) - This field is used for your Prestige on the
server side LAN. Your Prestige can spoof a response to a server’s
Watch Dog request after an expected drop of connection. In this
field, enter in the time (number of minutes) that you want your
Prestige to spoof the Watch Dog response.
8. SAP/RIP Timeout (min) - This field indicates the amount of time
that you want your Prestige to maintain the SAP and RIP entries
learned from this Remote Node in its internal tables after the
connection has been dropped. If this information is retained, then
your Prestige will not have to get the SAP information when the line
is brought back up. Enter the desired time (in minutes) in this field.
Once you have completed filling in the Network Layer Options Menu,
press ENTER to return to Menu 11.1. Press ENTER at the message:
Press ENTER to Confirm ... to save your selections, or press ESC at
any time to cancel your selections.
Static Route Setup
If your LAN-to-LAN application has NetWare servers on both sides
of the link, then all NetWare client stations will have access to a server
on their LAN as shown below: