Filter
Top Products
98 Troubleshooting
Problems With the IDSL Line
The IDSL LEDs Not On
Check the connection between your two routers. When they are
connected, the link and B1/B2 LED should be on if the transfer type is
leased 128; and the link and B1 LED are on if the transfer type is
leased 64.
1. Check the IDSL line if it is a single line to connect a pair of routers.
2. Check the counter Prestige see whether it is still alive.
3. Check with telephone company if the IDSL line is connected to
telephone company.
Problems with the LAN Interface
Can not PING any station on the LAN
1. Check the LAN LED on the front panel of your Prestige. If it is on,
then the link is up. If it is off, then check the cables connecting your
Prestige to your LAN.
2. The type of Ethernet interface that you have configured in menu 3.1.
Verify that you are using the same (AUI or 10Base-T) as
configured in this menu.
3. Verify with your network administrator that the IP address and the
IP subnet mask configured in menu 3.2 are valid for that LAN.
4. Check the physical Ethernet cable, and make sure the connections
on your Prestige and the hub are secure.