Filter
Top Products
Novell IPX Configuration 59
Figure 7-5 NetWare Servers on Both Sides of the Link
This may present a problem if you desire your client station to access a
server at a remote site. For example, in the above diagram, suppose
that a client station on the network on the left wishes to access the
NetWare server on the right (internal network number = 111).
However, the SAP broadcasts will receive a response from the server
on the left (internal network number = 444). A static route is used to
resolve this problem by providing your Prestige with some static routing
information to access the remote server.
From Menu 12, select one of the four possible IPX Static Routes as
shown below: