ZyXEL Communications 2602HWNLI-D7A Modem User Manual


 
Prestige 2602HWNLI-D7A Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
27
9.
10.
Action= Edit , Select Rule= 0
Press ENTER to Confirm or ESC to Cancel:
We will just look at the differences from the previous menu. Note that, this screen is not read only, so we have
extra Action and Select Rule fields. Not also that the [?] in the Set Name field means that this is a required field
and you must enter a name for the set. The description of the other fields is as described above. The Type,
Local and Global Start/End IPs are configured in Menu 15.1.1 (described later) and the values are displayed
here.
Field
Description
Option
Set Name
Enter a name for this set of rules. This is a required field. Please note
that if this field is left blank, the entire set will be deleted.
Rule1
Action
They are 4 actions. The default is Edit. Edit means you want to edit a
selected rule (see following field). Insert Before means to insert a new
rule before the rule selected. The rule after the selected rule will then be
moved down by one rule. Delete means to delete the selected rule and
then all the rules after the selected one will be advanced one rule. Save
Set means to save the whole set (note when you choose this action the
Select Rule item will be disabled).
Edit
Insert Before
Delete
Save Set
Select Rule
When you choose Edit, Insert Before or Save Set in the previous field
the cursor jumps to this field to allow you to select the rule to apply the
action in question.
1
Note: Save Set in the Action field means to save the whole set. You must do this if you make any changes to
the set-including deleting a rule. No changes to the set take place until this action is taken. Be careful when
ordering your rules as each rule is executed in turn beginning from the first rule.
Selecting Edit in the Action field and then selecting a rule brings up the following menu, Menu
15.1.1.1-Address Mapping Rule in which you can edit an individual rule and configure the Type, Local and
Global Start/End IPs displayed in Menu 15.1.1.
Menu 15.1.1.1 - - Rule 1
Type: One-to-One