Filter
Top Products
Prestige 2602HWNLI-D7A Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
86
Check Mechanism = DSL Link
Check WAN IP Address1 = 0.0.0.0
Check WAN IP Address2 = 0.0.0.0
Check WAN IP Address3 = 0.0.0.0
KeepAlive Fail Tolerance = 5
Recovery Interval(sec) = 60
ICMP Timeout(sec) = 0
Traffic Redirect = Yes
Key Settings:
Label
Description
Backup
Type
Select the method that the Prestige uses to check the DSL connection.
Select DSL Link to have the Prestige check if the connection to the DSLAM is up. Select ICMP to have the
Prestige periodically ping the IP addresses configured in the Check WAN IP Address fields.
Check
WAN IP
Address1-3
Configure this field to test your Prestige's WAN accessibility. Type the IP address of a reliable nearby
computer (for example, your ISP's DNS server address).
If you select ICMP in the Backup Type field, you must configure at least one IP address here.
When using a WAN backup connection, the Prestige periodically pings the addresses configured here and
uses the other WAN backup connection (if configured) if there is no response.
Fail
Tolerance
Type the number of times (2 recommended) that your Prestige may ping the IP addresses configured in the
Check WAN IP Address fields without getting a response before switching to a WAN backup connection (or
a different WAN backup connection).
Recovery
Interval
When the Prestige is using a lower priority connection (usually a WAN backup connection), it periodically
checks to whether or not it can use a higher priority connection.
Type the number of seconds (30 recommended) for the Prestige to wait between checks. Allow more time if
your destination IP address handles lots of traffic.
Timeout
Type the number of seconds (3 recommended) for your Prestige to wait for a ping response from one of the
IP addresses in the Check WAN IP Address fields before timing out the request. The WAN connection is
considered "down" after the Prestige times out the number of times specified in the Fail Tolerance field. Use
a higher value in this field if your network is busy or congested.
Traffic