Filter
Top Products
Installation 5
2. Insert the driver diskette into the floppy drive and set to the appropriate drive
(A:\). Then type INSTALL and press Enter.
3. Select Microsoft LAN Manager from the menu screen.
4. Check the card settings. If current settings are correct, select Start Installation
and go to step 5. Otherwise, select Modify Parameters to change settings.
5. Select the appropriate values then press Enter. When you are finished, press OK
to exit.
6. The installation program will install all necessary drivers and modify your
computers AUTOEXEC.BAT and NET.CFG directories.
7. Select Yes then press Enter to modify the files.
8. Reboot your computer and the new settings will take effect.
Example of PROTOCOL.INI:
[PROTMAN]
DRIVERNAME = PROTMAN$
DYNAMIC = YES
PRIORITY = NETBEUI
[NETBEUI_XIF]
Drivername = netbeui$
SESSIONS = 6
NCBS = 12
BINDINGS = "LMNDIS_NIF"
LANABASE = 0
[LMNDIS_NIF]
; protocol.ini session for multifunction
LAN/MODEM driver.
IOADDRESS = 0x320
INTERRUPT = 11
DRIVERNAME = LMNDIS$