Filter
Top Products
10 Installation
3. Click the HAVE DISK button.
4. Insert the Ethernet + Fax/Modem PC Card driver disk into floppy drive.
5. Enter the correct path for Windows NT 4.0 drivers then press OK.
6. A dialog box will pop up. Give appropriate system resources to the Ethernet +
Fax/Modem PC Card; the settings must be unique for this device. Refer to
“Resources Recommendation” for NT 3.51 details.
7. Press OK when all setting are complete.
8. Press CLOSE to complete NETWORK setting.
9. Reboot Windows NT.
Modem configuration for NT 4.0
1. Choose My computer, Control Panel, Modems.
2. Press NEXT.
3. From the Modem manufactures & Models list screen, choose your modem and
click FINISH and then CLOSE to complete the modem configuration.
4. Reboot the system.
Windows 95 Installation
1. Windows 95 should automatically detect new hardware. From the New
Hardware Found dialog box, select Driver from disk provided by hardware
manufacturer.
2. Enter the correct path, i.e. “A:\”, then insert Ethernet + Fax/Modem PC Card
driver disk. The driver will be installed automatically, and system may ask for the
Windows 95 installation CD/disks to update the existing files or drivers. After the
update, system will reboot automatically.
3. After installation is complete, My computer, Control Panel, Network to add
Protocols according to your application requirements.
4. Reboot the machine to complete the installation.
Artisoft Lantastic 6.0 Installation
1. Install LANTASTIC 6.0.
2. Run INSTALL.EXE in the Ethernet + Fax/Modem multifunction PC Card driver
disk‘s root directory.
3. Select LANTASTIC 6.0 from the Network Operating System screen, then enter
Driver Install screen.