Filter
Top Products
ZyXEL AG-200 User’s Guide
Getting Started 1-5
1) Click on [Add] and the following screen will appear.
2) On this screen you will insert some basic settings for your wireless network.
a. [Profile Name] Enter in a descriptive name for this profile.
b. [Network Mode] If connecting to an access point or wireless router, choose
“Infrastructure”
3
. If you are going to network one computer directly to another
computer without an access point, then choose “Ad-Hoc”
4
.
c. [SSID] Select [Browse] The utility will perform a brief site survey and display the
results to you. Click on the SSID
5
of the access point you would like to connect to and
3
Infrastructure: You will need an access point to use the ZyXEL wireless adapter in Infrastructure mode. Because all
communication will be done via the Access Point, the Access Point’s SSID must be used.
4
Ad-Hoc: In Ad-Hoc mode communication is made peer-to-peer between the client PCs and without the use of an
Access Point. All PCs communicating in an Ad-Hoc should use the same SSID (whatever your choice is).