Filter
Top Products
G-470 User’s Guide
40 Chapter 4 Introducing the Web Configurator
Figure 16 Web Configurator: the Status screen
The following table describes the labels in this screen.
Table 3 Web Configurator: the Status screen
LINK/ICON FUNCTION
Wizard Use these screens for initial configuration including general
setup, wireless and security settings.
About Click this icon to see details about your ZyXEL Device.
Logout Click this icon to exit the web configurator.
Status Use this screen to look at the ZyXEL Device’s general device,
system and interface status information.
System Use this screen to change the name of the device and change
IP address settings.
Wireless Wireless Settings Use this screen to check for available access points and
configure basic and advanced wireless network setup.
Security Use this screen to configure encryption settings.
Management Password Use this screen to change your password.
Configuration File Use this screen to backup and restore configuration files and
reset the ZyXEL Device to its factory default settings.
F/W Upload Use this screen to upload new firmware.
Device
Information
Device Name This is the same as the device name you entered in the first
wizard screen if you entered one there. It is for identification
purposes.
Click the Logout icon at any time
to exit the web configurator.
Use
submenus
to configure
the ZyXEL
Device