Filter
Top Products
Omni 56K II and Omni 56K Plus II User’s Guide
5-8 Command Sets
COMMAND OPTIONS FUNCTION & DESCRIPTION REF.
&T4 Grant a Remote Digital Loop-back request from a
remote modem.
S14.1
&T5 Deny a Remote Digital Loop-back request from a
remote modem.
S14.1
&T6 Initiate a Remote Digital Loop-back (RDL) test.
&T7 Initiate a Remote Digital Loop-back test with self-
test. (RDL+ST)
&T8 Initiate an Analog Loop-back test with self-test.
(ALB+ST)
View the profile settings.
&V0 View the current active settings.
&V1 View the user profile settings.
&Vn
&V2 View the factory default settings.
&W Save the current settings to user profile in
nonvolatile RAM. (See also S35.6)
Break handling. Destructive Break clears the buffer.
Expedited Break is sent immediately to the remote
system.
S28.2-3
&Y0 Destructive, expedited.
&Y1 * Nondestructive, expedited.
&Yn
&Y2 Nondestructive, unexpedited.
&Z? Display all the phone numbers stored in nonvolatile
RAM.
&Zn=s n=0-3 Store phone number/s to NVRAM at location n (n=0-
3) use AT*Dn or ATS29=n to set the default dial
pointer.