Filter
Top Products
P314 Broadband Sharing Gateway with 4-Port Switch
10-2 System Maintenance and Information
10.2 Call Control Support
The Prestige provides two call control functions: budget management and call history.
Please note that this menu is only applicable when Encapsulation is set to
PPPoE
in Menu
4 or Menu 11.1.
The budget management function allows you to set a limit on the total outgoing call time of the Prestige
within certain times. When the total outgoing call time exceeds the limit, the current call will be dropped and
any future outgoing calls will be blocked.
Call history chronicles preceding incoming and outgoing calls.
To access the call control menu, select option
9. Call Control
in Menu 24 to go to Menu 24.9 – System
Maintenance – Call Control, as shown in the next table.
Figure 10-3 Call Control
10.2.1 Budget Management
Menu 24.9.1 shows the budget management statistics for outgoing calls. Enter
1
from Menu 24.9 – System
Maintenance – Call Control to bring up the following menu.
Figure 10-4 Budget Management
The total budget is the time limit on the accumulated time for outgoing calls to a remote node. When this
limit is reached, the call will be dropped and further outgoing calls to that remote node will be blocked. After
each period, the total budget is reset. The default for the total budget is 0 minutes and the period is 0 hours,
meaning no budget control. You can reset the accumulated connection time in this menu by entering the
Menu 24.9 - System Maintenance - Call Control
1.
Budget Management
2.
Call History
Enter Menu Selection Number:
Menu 24.9.1 - Budget Management
Remote Node
1. ChangeMe
Connection Time/Total Budget
No Budget
Elapsed Time/Total Period
No Budget
Reset Node (0 to update screen):