Filter
Top Products
P314 Broadband Sharing Gateway with 4-Port Switch
4-2 Remote Node Setup
Table 4-1 Fields in Menu 11.1
Field Description Examples
Rem Node Name
Enter a descriptive name for the remote node. This field
can be up to eight characters.
LAoffice
Active
Press the [SPACE BAR] to toggle between
Yes
and
No
and activate (deactivate) the remote node.
Yes
Encapsulation Ethernet
is the default encapsulation. Press the [SPACE
BAR] if you wish to change to
PPPoE
encapsulation.
Ethernet
Service Type
Press the [SPACE BAR] to select from
Standard
,
RR-
Toshiba
(RoadRunner Toshiba authentication method)
or
RR-Manager
(RoadRunner Manager authentication
method). Choose one of the RoadRunner methods if
your ISP is Time Warner's RoadRunner; otherwise
choose
Standard
.
Standard
Service Name
This is valid only when you have chosen PPPoE
encapsulation. If you are using PPPoE encapsulation,
then type the name of your PPPoE service here.
poellc
Outgoing: My
Login
This field is applicable for
PPPoE
encapsulation only.
Enter the login name assigned by your ISP when the
Prestige calls this remote node. Some ISPs append this
field to the
Service Name
field above (e.g.,
jim@poellc
)
to access the PPPoE server.
jim
Outgoing: My
Password
Enter the password assigned by your ISP when the
Prestige calls this remote node. Valid for
PPPoE
encapsulation only.
*****
Server IP
This field is valid for RoadRunner service type only. The
Prestige will find the RoadRunner Server IP
automatically if this field is left blank. If it does not, then
you must enter the authentication server IP address
here.
Route
This field refers to the protocol that will be routed by your
Prestige – IP only for the P314.
IP
Edit IP
This field leads to a “hidden” menu. Press the [SPACE
BAR] to select
Yes
and press [ENTER] to go to M
enu
11.3 – Remote Node Network Layer Options
.
Yes
Session Options:
Edit Filter sets
This field leads to another “hidden” menu. Use the
[SPACE BAR] to toggle this field to
Yes
and press
[ENTER] to open Menu 11.5 to edit the filter sets. See
the Remote Node Filter section for more details.
Yes