ZyXEL Communications P-660R-Tx v2 Series Network Router User Manual


 
P-660R-Tx v2 Series User’s Guide
109 Chapter 12 Maintenance
Note: Do not turn off the ZyXEL Device while configuration file upload is in progress.
After you see a “Restore Configuration Successful” screen, you must then wait one minute
before logging into the ZyXEL Device again.
Figure 61 Restore Configuration Successful
The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your desktop.
Figure 62 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default ZyXEL Device IP address
(192.168.1.1). See the appendix for details on how to set up your computer’s IP address.
12.7.3 Back to Factory Defaults
Pressing the Reset button in this section clears all user-entered configuration information and
returns the ZyXEL Device to its factory defaults.
Upload Click Upload to begin the upload process.
Back Click this button to go back to the main Configuration screen.
Table 33 Maintenance Restore Configuration
LABEL DESCRIPTION