Filter
Top Products
Chapter 2 Introducing the Web Configurator
P-660RU-Tx User’s Guide
39
As illustrated above, the main screen is divided into these parts:
• A - navigation panel
• B - main window
2.2.1 Navigation Panel
Use the menu items on the navigation panel to open screens to configure P-
660RU-Tx features. The following tables describe each menu item.
Table 2 Navigation Panel Summary
LINK TAB FUNCTION
Status
Device Info This screen shows the P-660RU-Tx’s general device and network
status information.
System Log Use this screen to display your device’s logs.
Statistics Use this screen to display the statistics of the P-660RU-Tx.
Quick Start
Quick Start Use this wizard to set up your Internet connection.
Interface Setup
Internet Internet Use this screen to configure ISP parameters, WAN IP address
assignment and other advanced properties.
PVC Summary
Table
Use this screen to display your PVC settings.
LAN LAN Use this screen to configure LAN TCP/IP and DHCP settings and
other advanced properties.
DHCP IP Pool
Summary
Use this screen to display the IP and MAC addresses of the
computers on your LAN.
Advanced Setup
Routing Routing Table
List
Use this screen to display the static routes on your P-660RU-Tx.
Static Route Use this screen to configure IP static routes to tell your device
about networks beyond the directly connected remote nodes.
NAT NAT Use this screen to configure the NAT settings.
DMZ
Use this screen to configure the DMZ settings.
Virtual Server Use this screen to forward incoming service requests to the
server(s) on your local network.
IP Address
Mapping
Use this screen to change your P-660RU-Tx’s address mapping
settings.
QoS QoS Use this screen to enable QoS and traffic prioritizing and
configure bandwidth management on the WAN.
QoS Settings
Summary
Use this screen to check the QoS rules and actions you
configured for the P-660RU-Tx.
ADSL Use this screen to configure the ADSL settings on your P-660RU-
Tx.