Filter
Top Products
Chapter 6 Quick Start Wizard
P-660RU-Tx User’s Guide
56
The following table describes the fields in this screen.
Figure 18 ISP Connection: Bridge Mode
The following table describes the fields in this screen.
Table 9 ISP Connection: PPPoE/PPPoA
LABEL DESCRIPTION
Username Enter the username exactly as your ISP assigned. If assigned a name in
the form user@domain where domain identifies a service name, then
enter both components exactly as given.
Password Enter the password associated with the above username.
VPI Enter the VPI assigned to you. This field may already be configured. VPI
defines a virtual circuit. Refer to the appendix for more information.
VCI Enter the VCI assigned to you. This field may already be configured. VCI
defines a virtual circuit. Refer to the appendix for more information.
Connection
Type
Select the multiplexing method used by your ISP from the drop-down
list box.
Available options are: PPPoE LLC, PPPoE VC-Mux, PPPoA LLC and
PPPoA VC-Mux.
BACK Click this to return to the previous screen without saving.
NEXT Click this to continue to the next wizard screen.
EXIT Click this to close the wizard screen without saving.
Table 10 ISP Connection: Bridge Mode
LABEL DESCRIPTION
VPI Enter the VPI assigned to you. This field may already be configured. VPI
defines a virtual circuit. Refer to the appendix for more information.
VCI Enter the VCI assigned to you. This field may already be configured. VCI
defines a virtual circuit. Refer to the appendix for more information.
Connection
Type
Select the multiplexing method used by your ISP from the drop-down list
box.
Available options are: 1483 Bridged IP LLC and 1483 Bridged IP VC-
Mux.
BACK Click this to return to the previous screen without saving.