Filter
Top Products
P-660RU-Tx User’s Guide
85
CHAPTER 9
Static Route
9.1 Overview
The P-660RU-Tx usually uses the default gateway to route outbound traffic from
computers on the LAN to the Internet. To have the P-660RU-Tx send data to
devices not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the P-660RU-Tx’s
LAN interface. The P-660RU-Tx routes most traffic from A to the Internet through
the P-660RU-Tx’s default gateway (R1). You create one static route to connect to
services offered by your ISP behind router R2.
Figure 31 Example of Static Routing Topology
9.1.1 What You Can Do in the Static Route Screens
•Use the Routing Table List screen (Section 9.2 on page 86) to view static
routes on the P-660RU-Tx.
•Use the Static Route screen (Section 9.2.1 on page 87) to add or edit IP static
routes on the P-660RU-Tx.
WAN
R1
R2
A
LAN