Filter
Top Products
Chapter 7 Internet Setup
P-660RU-Tx User’s Guide
65
7.2.2 Static IP Address
In the Interface Setup > Internet screen, select Static IP Address from the
ISP field to display the following screen.
Figure 23 Interface Setup > Internet (Static IP)
The following table describes the labels in this screen.
Table 13 Interface Setup > Internet (Static IP)
LABEL DESCRIPTION
Encapsulation Select the method of multiplexing used by your ISP from the drop-
down list box. Available options are: 1483 Bridged IP LLC, 1483
Bridged IP VC-Mux, 1483 Routed IP LLC(IPoA) and 1483
Routed IP VC-Mux.
Static IP Address A static IP address is a fixed IP that your ISP gives you. Type your ISP
assigned IP address in the field.
IP Subnet Mask Enter a subnet mask in dotted decimal notation.
Gateway Specify a gateway IP address (supplied by your ISP).
Bridge Interface This field is only available when you select 1483 Bridged IP LLC or
1483 Bridged IP VC-Mux in the Encapsulation field.
Use this field to enable or disable the bridge mode. Activate the bridge
mode when your ISP provides you with more than one IP address and
you want the connected computers to get individual IP address from
ISP’s DHCP server directly.
NAT Use this field to enable or disable Network Address Translation (NAT).
Default Route Select Yes to direct traffic not listed in the routing table to the default
gateway. Select No to drop traffic not listed in the routing table.