Filter
Top Products
Chapter 7 Internet Setup
P-660RU-Tx User’s Guide
62
7.2 The Internet Screen
Use this screen to change your P-660RU-Tx’s WAN settings. Click Interface
Setup > Internet. The Dynamic IP Address part of this screen differs by the
encapsulation you select.
Figure 21 Interface Setup > Internet
The following table describes the labels in this screen.
Table 11 Interface Setup > Internet
LABEL DESCRIPTION
ATM VC
Virtual Circuit Select the PVC you want to configure from the drop-down list box.
PVCs
Summary
Click this to display a summary table of the PVC settings on your P-
660RU-Tx. See Section 7.2.5 on page 70 for more details.
Status Use this field to enable or disable the PVC.
VPI Virtual Path Identifier (VPI) defines a virtual circuit. Refer to the
appendix for more information. Enter the VPI assigned to you.
VCI Virtual Channel Identifier (VCI) defines a virtual circuit. Enter the VCI
assigned to you. Refer to the appendix for more information.