Filter
Top Products
Chapter 7 Wireless LAN
P-870HN-51D User’s Guide
115
7.7 The WPS Station Screen
Use this screen to set up a WPS wireless network using either Push Button
Configuration (PBC) or PIN Configuration.
Note: If you select No Security in the Wireless LAN > General screen and click
Push Button in the WPS Station screen, the P-870HN-51D automatically
changes to use WPA-PSK/WPA2-PSK mixed mode and generates a pre-
shared key.
Click Network > Wireless LAN > WPS Station. The following screen displays.
Figure 54 Network > Wireless LAN > WPS Station
The following table describes the labels in this screen.
Table 33 Network > Wireless LAN > WPS Station
LABEL DESCRIPTION
Push Button Click this button to add another WPS-enabled wireless device (within
wireless range of the P-870HN-51D) to your wireless network. This
button may either be a physical button on the outside of device, or a
menu button similar to the Push Button on this screen.
Note: You must press the other wireless device’s WPS button within
two minutes of pressing this button.
Or input
station's PIN
number
Enter the PIN of the device that you are setting up a WPS connection
with and click Start to authenticate and add the wireless device to your
wireless network.
You can find the PIN either on the outside of the device, or by checking
the device’s settings.
Note: You must also activate WPS on that device within two minutes
to have it present its PIN to the P-870HN-51D.