Filter
Top Products
Chapter 14 Quality of Service (QoS)
P-870HN-51D User’s Guide
173
14.4.1 Adding a QoS Queue
Click the Add button or the edit icon in the Queue Setup screen to configure a
queue.
Figure 89 QoS Queue Setup: Add
The following table describes the labels in this screen.
Buffer
Management
This shows the queue management algorithm used for this queue.
Queue management algorithms determine how the P-870HN-51D should
handle packets when it receives too many (network congestion).
Rate Limit This shows the maximum transmission rate allowed for traffic on this
queue.
Modify Click the Edit icon to go to the screen where you can edit the queue.
Click the Remove icon to delete an existing queue. Note that subsequent
rules move up by one when you take this action.
Apply Click Apply to save your changes back to the P-870HN-51D.
Table 61 QoS Queue Setup
LABEL DESCRIPTION
Table 62 QoS Queue Setup: Add
LABEL DESCRIPTION
Enable Select to enable or disable this queue.
Name Enter the descriptive name of this queue.
Interface Select the interface to which this queue is applied.
Priority Select the priority level (from 1 to 3) of this queue.
The smaller the number, the higher the priority level. Traffic assigned to
higher priority queues gets through faster while traffic in lower priority
queues is dropped if the network is congested.