Filter
Top Products
Chapter 5 WAN Setup
P-870HN-51D User’s Guide
71
5.3 Before You Begin
You need to know your Internet access settings such as encapsulation and WAN IP
address. Get this information from your ISP.
5.4 The Layer 2 Interface Screen
The P-870HN-51D must have a layer-2 interface to allow users to use the DSL
port to access the Internet.
Figure 28 Layer 2 Interface
The following table describes the fields in this screen.
Table 12 Layer 2 Interface
LABEL DESCRIPTION
Interface This is the name of the interface.
Connection Mode This displays the connection mode of the layer-2 interface.
QoS This displays whether QoS (Quality of Service) is enabled on the P-
870HN-51D.
Remove Click the Remove button to delete this interface from the P-870HN-
51D. A window displays asking you to confirm that you want to delete
the interface.
Note: You cannot remove the layer-2 interface when a WAN
service is associated with it.
Add Click this button to create a new layer-2 interface.