Filter
Top Products
P-870HN-51D User’s Guide
191
CHAPTER 16
Remote Management
16.1 Overview
This chapter explains how to configure the remote management and access
control settings on the P-870HN-51D.
16.1.1 What You Can Do in this Chapter
•The TR-069 screen lets you configure the P-870HN-51D’s TR-069 auto-
configuration settings (Section 16.3 on page 193).
•The TR-064 screen lets you enable management via TR-064 on the P-870HN-
51D (Section 16.3 on page 193).
•The Service Control screens let you configure through which interface(s) users
can use which service(s) to manage the P-870HN-51D (Section 16.4 on page
194).
•The IP Address screens let you configure from which IP address(es) users can
use a service to manage the P-870HN-51D (Section 16.5 on page 195).
16.2 The TR-069 Screen
TR-069 defines how Customer Premise Equipment (CPE), for example your P-
870HN-51D, can be managed over the WAN by an Auto Configuration Server
(ACS). TR-069 is based on sending Remote Procedure Calls (RPCs) between an
ACS and a client device. RPCs are sent in Extensible Markup Language (XML)
format over HTTP or HTTPS.
An administrator can use an ACS to remotely set up the P-870HN-51D, modify
settings, perform firmware upgrades as well as monitor and diagnose the P-
870HN-51D. You have to enable the device to be managed by the ACS and specify
the ACS IP address or domain name and username and password.