A SERVICE OF

logo

Open as PDF
next previous
Add-On Devices
Using Plug-In Modules
88 Corporate Evaluator’s Guide
3. Press the button on the module release latch, and slide the latch toward the front of
the expansion base.
4. Grasp the module and pull it out.
5. Slide the new plug-in module into the computer until it clicks into place.
6. For Windows 98, click OK to close the BayManager window.
If needed, you can connect the floppy disk drive to the USB port on the computer or
expansion base—see “To connect the floppy disk drive“ on page 30.
If you need to format a hard disk drive module, see “To prepare a new hard disk drive“
on page 108.