A SERVICE OF

logo

256 Chapter 11
Utilities
tc_init
Execute tc_init after the node has been configured by jf-
node_ip_set and xconfig. ccmd must finish the scan database
generation. Once ccmd executes, the changes become effective the next
time test_controller is running. If ccmd is running when tc_init is
executed then test_controller must be restarted.
tc_init only needs to be executed once. The following are the only
reasons for having to rerun this utility:
NVRAM is corrupted.
The system is reconfigured
NOTE tc_init is run as part of the fw_init script and should not be run
under normal circumstances.