Scanning
58 Kodak ESP 7 Printer User Guide
5 Any changes you make to the scan settings apply only to the current scan operation. To
keep the settings as permanent, press
until Save as Defaults is selected, and then
press
OK.
6 Press
Start to initiate the scan.
The available scan settings are in the following table:
Scan options
If you select
Document
and save the scan to a
File
, the scan is saved as a document (.pdf
or .rtf) file, even if the original is a photo. If you select
Photo, a text document will be
scanned as an image file, and cannot be read by optical character recognition (OCR)
software.
If your printer is connected to a network, more than one computer name will appear in
this list. If your printer is connected to a printer by the USB cable, the computer name in the
menu is called
USB Connected Computer
.
You must create a list of one or more applications using Home Center software for any
to display by name in the
Scan Destination
settings. Each application will appear as a
separate setting in the display. (Kodak Home Center software is displayed by default; you
do not need to configure your destinations to include it.)
In addition, before using a
Scan Destination
setting of
File
, familiarize yourself with the
location where the files will be saved and with the file naming setting. This will prevent
problems later in finding the scan file on your computer.
Menu Options
View Settings /
Select
Settings
Scan What
or
Document
Photo
Scan To
or
Computer
Memory Card
Scan Destination
or
File
[Application Name]
Save As Defaults
OK
