Troubleshooting
82 Kodak ESP 7 Printer User Guide
Print skewed or slanted
Probable Cause 1
The paper is not properly loaded in the tray.
Corrective Action
Realign the paper in the paper tray.
1 Remove paper and check for wrinkles and tears.
2 Slide the paper edge guide away from the paper.
3 Straighten the stack of paper against a flat surface, and reload it into the paper tray.
4 Slide the paper edge guide up against the edge of the paper.
Probable Cause 2
More than one type or size of paper is loaded.
Corrective Action
Load only one type or size of paper at a time.
Print spotted
Probable Cause
Paper may be dirty.
Corrective Action
Use a dry, lint-free cloth to wipe clean. For excessive dirt or debris, thoroughly clean the
paper tray, and load new paper.
Print too dark
• Try taking the picture again with the flash on, or move within the flash range of the
camera. Refer to your camera user’s guide for details.
• Adjust the exposure compensation on your camera and try taking the picture again.
Refer to your camera user’s guide for details.
• Edit the picture using Kodak Home Center (Windows only) or other image editing
software.
• Make sure the printer is not placed in direct sunlight or is not operating in a high-
temperature environment.
Caution: Kodak Inkjet paper is recommended for your Kodak All-in-One printer.
Note: When you are not using the printer, keep paper tray covers closed to keep
dust and debris from collecting on the paper or inside the printer.
